Lian Li

Home    Press Room    Lian Li    Press Releases

  HOT NEWS        Lian Li Announces a Tall, Slim EATX Chassis with Three Internal Compartments – PC-X2000FN

Compartmentalize Your Hardware


17 July 2012, Keelung, Taiwan - Lian-Li Industrial Co. Ltd, today announces a tall, slim brushed aluminum EATX supported chassis – PC-X2000FN. The PC-X2000FN keeps DIY builder's hardware neat and organized in the interior with its three separate compartments, while having a sleek, elegant feel on the outside thanks to the one-piece front panel with no visible vents on holes.

693mm (27.3”) tall and 240mm (9.4”) wide, the PC-X2000FN lets DIY builders install the hardware they desire in a neat, organized and compartmentalized fashion. The top section holds 5.25”, 3.5” and 2.5” drives. The middle section is for motherboards up to the EATX form factor, and has plenty of room for cable management thanks to the rubber grommets and generous space behind the motherboard tray. The bottom compartment holds the power supply as well as an additional 3.5” HDD cage.

The PC-X2000FN holds up to seven hotswappable 3.5” hard drives - four 3.5” HDDs in the top compartment and three 3.5” HDDs in the bottom one. A 2.5” hard drive cage allows users to install up to three SSDs in the top compartment. For even more storage capabilities, two additional 3.5” HDD or a 3.5” and a 2.5” can be installed in the middle compartment.

The two 5.25” bays in the top section face the side panel rather than the front helping to add to the sleek external aesthetics of the PC-X2000FN.

The middle section is the roomiest by far. Thanks to the other hardware being compartmentalized in the sections above and below, DIY builders do not need to worry about space limitations for expansion cards and CPU coolers. CPU coolers up to 180mm (7.0”) in height and expansion cards up to 340mm (13.3”) in length fit comfortably. Also, the ten expansion slots with tool-less latches to secure cards into place, give this tall, slim chassis plenty of room for future expandability.

Power supplies up to 230mm (9.0”) in length can be placed in the bottom compartment. Ventilation slits underneath the PSU with a removable pull-out filter help increase the life and performance of the power supply.

The front panel is all one piece with no vents or holes giving the PC-X2000FN a sleek, elegant look. Since there are no vents on the front panel, cool air is pulled in through vents on the front of the side panels by three 140mm fans. To ensure long hardware lifetimes, a slide-out washable air filter located in front of the fans keeps out dirt and dust. One 120mm fan in the rear of the middle compartment and one 140mm fan in the top compartment blow out excess heat. The built-in fan controller helps DIY builders find the balance between silence and cooling.

This elegant brushed aluminum chassis has many other features that DIY builders can appreciate, including: easy-to-remove pop-off panels for simple installations and upgrades, water cooling support and sturdy aluminum feet with rubber bottoms to reduce vibrations.

The PC-X2000FN has an all black interior and exterior and is available for the suggested retail price of US$499 / €319.

Specifications:

Model

PC-X2000FN

Case Type

Full tower chassis

Dimensions

(W) 240mm x (H) 693mm x (D) 455mm

Front bezel Material

Aluminum

Side Panel

Aluminum

Body Material

Aluminum

Color

All Black

Net Weight

11KG

5.25" drive bay (External)

2

3.5" drive bay (External)

None

HDD bay

3.5-Inch HDD x9 (hotswap x7)
/ 2.5-Inch HDD x3
or 3.5-Inch HDD x8 (hotswap x7)
/ 2.5-Inch HDD x4

Expansion Slot

10

Motherboard

EATX / ATX / Micro-ATX

System Fan (Front)

140mm Fan x3

System Fan (Top)

None

System Fan (Rear)

120mm Fan x1
140mm Fan x1

I/O Ports

USB 3.0 x 4
e-SATA x 1
HD Audio

Maximum Compatibility

VGA Card length: 340mm
PSU length: 230mm
CPU cooler height: 180mm


Product Information and detailed specifications: http://www.lian-li.com/v2/en/product/product06.php?pr_index=627&cl_index=1&sc_index=25&ss_index=62&g=spec

About Lian Li

Lian Li Industrial Co. Ltd is an Aluminum Chassis and Chassis peripheral manufacturer and provider of industrial wholesale as well as OEM & ODM services for the PC industry as required. With over 20 years of service excellence, ISO 9001 certification and a team of professional staff willing to do the utmost to deliver durable, superior quality products, all backed by a *2 year guarantee; your satisfaction is guaranteed (*conditions apply). To learn more about Lian Li, please visit their websites at www.Lian-Li.com

Files:
Lian_Li_PC-X2000FN_images.zip
Lian-Li_PC-X2000FN_EN.doc
Lian-Li_PC-X2000FN_EN.html

<- Back to: Lian Li